Blue Sea ML Series Automatic Charging Relay with Remote Control, p/n 7620
Mfr: Blue Sea Systems
$281.99
DESCRIPTION
Blue Sea ML Series Heavy Duty Automatic Charging Relay
p/n 7620
• Includes ML-Series Remote Control Contura Switch PN 2146
• Automatically manages the charging of two large battery banks
• Allows paralleling of battery banks for emergency starting
• 500 Ampere continuous rating to support high-output alternators
• Magnetic Latch (ML) - ACR draws very low current (<40mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state
• Dual sensing - senses charge on both battery banks
• Start Isolation (SI) - can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics
• Engine Isolation (EI) - can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output
• Senses charging on two battery banks
• LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, or in Start or Engine isolation
• 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
• 7/8" (22mm) stud length accepts multiple cable terminals
• Silver alloy contacts provide high reliability for switching live loads
• Label recesses for circuit identification
Specifications:
Control Circuit Connection: Tinned Wire
Nominal Voltage: 12V DC
Manual Control: No
Engine Isolation: Yes
Mounting: #10
Start Assist: Yes
Start Isolation: Yes
Amperage Operating Current: 13mA
Amperage Operating Current when changing state: <7.0A
Continuous Rating: 500A
Intermittent Rating: 700A (5 min)
Cranking Rating 10 sec: 2500A
Cranking Rating 1 min: 1100A
Cable Size to Meet Ratings: 4/0 AWG x 2
Live Current Switching:300A @ 12V DC
Switching Cycles: 100000
Terminal Ring Diameter Clearance: 1.12 in (28.45 mm)
Terminal Stud Length: 1.50 in (38.1 mm)
Terminal Stud Size: 3/8-16 (M10)
Terminal Stud Torque : 140 in-lb (15.82 Nm)
Weight: 2.04 lb (0.93 kg)Blue sea 7620(PDF)
p/n 7620
• Includes ML-Series Remote Control Contura Switch PN 2146
• Automatically manages the charging of two large battery banks
• Allows paralleling of battery banks for emergency starting
• 500 Ampere continuous rating to support high-output alternators
• Magnetic Latch (ML) - ACR draws very low current (<40mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state
• Dual sensing - senses charge on both battery banks
• Start Isolation (SI) - can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics
• Engine Isolation (EI) - can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output
• Senses charging on two battery banks
• LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, or in Start or Engine isolation
• 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
• 7/8" (22mm) stud length accepts multiple cable terminals
• Silver alloy contacts provide high reliability for switching live loads
• Label recesses for circuit identification
Specifications:
Control Circuit Connection: Tinned Wire
Nominal Voltage: 12V DC
Manual Control: No
Engine Isolation: Yes
Mounting: #10
Start Assist: Yes
Start Isolation: Yes
Amperage Operating Current: 13mA
Amperage Operating Current when changing state: <7.0A
Continuous Rating: 500A
Intermittent Rating: 700A (5 min)
Cranking Rating 10 sec: 2500A
Cranking Rating 1 min: 1100A
Cable Size to Meet Ratings: 4/0 AWG x 2
Live Current Switching:300A @ 12V DC
Switching Cycles: 100000
Terminal Ring Diameter Clearance: 1.12 in (28.45 mm)
Terminal Stud Length: 1.50 in (38.1 mm)
Terminal Stud Size: 3/8-16 (M10)
Terminal Stud Torque : 140 in-lb (15.82 Nm)
Weight: 2.04 lb (0.93 kg)Blue sea 7620(PDF)
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information, go to www.P65Warnings.ca.gov. RELATED ITEMS
PRODUCT REVIEWS
PRODUCT FAQs
SHIPPING & RETURNS
Warranty:
Blue Sea Systems stands behind its products for as long as you own them. Blue Sea Systems will replace or issue a credit for any of its products found to be defective in materials or manufacture. P12 Battery Chargers and P12 Remote Displays are warranted for a period of five years from the date of first purchase. Digital Meters and Vessel System Monitors are warranted for a period of three years from the date of first purchase. No compensation will be allowed for products not returned to Blue Sea Systems for analysis, nor will compensation be made for labor required to replace any defective product
Return:
- All returns must be received within 30 days of receipt of the order.
- Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.
- Please contact Go2marine LFS Marine and Outdoor for Manufacture Defects, Returns and help with Warranties.