Jabsco, 1" Bronze, Pedestal Impeller Pumps, Self Priming, 777 Series

Jabsco, 1" Bronze, Pedestal Impeller Pumps, Self Priming, 777 Series.

• Flow rate: Nominal 17.8 gpm, (80 Liters/min) at 1,500 rpm
• Self-priming from dry up to 7.8' (2.4m)
• Constructed from marine quality bronze and stainless steel for ruggedness and reliability
• Inexpensive to buy and operate, easy to service and maintain
• Will tolerate abrasive wear
• Handles hard and soft solids without clogging
• Can pump in either direction
• Will not airlock
• Body: Bronze
• Impeller: Neoprene or Nitrile
• Shaft: Stainless Steel
• Shaft Seal: Mechanical Face Seal or Lip Type
• Wearplate: Replaceable
• Bearings: Shielded Ball Bearings
• Port Type: 1" NPT Internal
• Weight: 5-3/4 lb (2.61kg)

Use for bilge pumping, wash down, bait tanks, engine cooling or any utility pump application. Drive directly with a flexible coupling or with a belt. Suction lines must be airtight or the pump will not self-prime. Do not run dry for more than 30 seconds. The pump uses the liquid being pumped for lubrication. Running at the lowest possible speeds will result in the longest possible pump life.