Jabsco, Self-Priming, 1/4" Bronze, Pedestal Impeller Pump, 2760 Series
- Flow rate: Nominal 4.4 gallons/min (20 Liters/min) at 1500 rpm
- Self-priming from dry up to 4.9ft (1.5m)
- Constructed from marine quality bronze and stainless steel for ruggedness and reliability
- Inexpensive to buy and operate, easy to service and maintain
- Will tolerate abrasive wear
- Handles hard and soft solids without clogging
- Can pump in either direction
- Will not airlock
- Body: Bronze
- Impeller: Neoprene, Nitrile
- Wearplate: Replaceable
- Shaft: Stainless Steel
- Shaft Seal: Lip Type
- Bearings: Sealed Ball Bearing
- Port Type: 1/4" Internal Thread
- Weight: 1-1/2 lb (0.7kg)
- Vertically oriented ports
- Do not run dry for more than 30 seconds
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
SHIPPING & RETURNS
The length of the warranty may vary by product, please refer to your product for the exact terms and conditions of the warranty for your purchase.
- All returns must be recevied within 30 days of receipt.
- Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.
- Please contact Go2marine LFS Marine and Outdoor for Manufacture Defects, Returns and help with Warranties.