Taylor Made Inflatable Dinghies Semi-Custom Covers

Mfr: Taylor Made Products
$147.86 to $186.72
QuantityPrice
ONLINE ONLY

0 No Reviews yet
Back
$147.86 to $186.72
QuantityPrice

DESCRIPTION

A semi-custom inflatable dinghy cover that is designed for pointed bow, rounded stern inflatable dinghies. This dinghy cover fits from bow to end of stern and accommodates low consoles without windscreens. It will NOT fit over an outboard motor. Mildew and UV resistant, the Hot Shot fabric is made of breathable acrylic coated polyester that is backed by a 5-Year Taylor Made Warranty.

  • Designed for pointed bow, rounded stern inflatable dinghies
  • Covers fit from bow to end of stern
  • Accommodates low consoles without windscreens
  • Does not fit over outboard motors
  • Cover can be used while trailering dinghy
  • Bow and transom corner reinforcements
  • Shock Corded Hems
  • Sewn-in Buckles
  • Tie-Down Strapping - 80 feet
To choose the correct semi-custom fit cover for your boat, measure the beam width and center line length of your boat.

These covers fit several makes and models of boats with same hull styles. The windshield pocket is in the average position for this range of boat. Your boat may differ.

Please measure carefully because these covers are made to order: 20% restocking fee may apply.
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information, go to www.P65Warnings.ca.gov.

SPECS

Item #
MPN
Center-Line Length
Max Beam Width
Taylor Made Inflatable Dinghies Semi-Custom Covers, 11'5" - 12'4", 66"
Item #:560898-11ft5in-12ft4in-66"
MPN:70137
Center-Line Length: 11'5" - 12'4"
Max Beam Width: 66"
Taylor Made Inflatable Dinghies Semi-Custom Covers, 9'5" - 10'4", 60"
Item #:560898-9ft5in-10ft4in-60"
MPN:70135
Center-Line Length: 9'5" - 10'4"
Max Beam Width: 60"
Taylor Made Inflatable Dinghies Semi-Custom Covers, 10'5" - 11'4", 66"
Item #:560898-10ft5in-11ft4in-66"
MPN:70136
Center-Line Length: 10'5" - 11'4"
Max Beam Width: 66"
Taylor Made Inflatable Dinghies Semi-Custom Covers, 7'5" - 8'4", 55"
Item #:560898-7ft5in-8ft4in-55"
MPN:70133
Center-Line Length: 7'5" - 8'4"
Max Beam Width: 55"
Taylor Made Inflatable Dinghies Semi-Custom Covers, 8'5" - 9'4", 55"
Item #:560898-8ft5in-9ft4in-55"
MPN:70134
Center-Line Length: 8'5" - 9'4"
Max Beam Width: 55"

RELATED ITEMS

PRODUCT REVIEWS

Back

Ratings & Reviews

No reviews available

Be the first to Write a Review

PRODUCT FAQs

SHIPPING & RETURNS

Warranty:

The length of the warranty may vary by product, please refer to documenation that came with your product for the exact terms and conditions of the warranty for your purchase.

Return:

Restocking charge will apply at a minimum of 20% for all product returned.

All cut or custom products are non-returnable.

All custom covers are patterned for standard boats from the factory and are non-returnable.

These Custom Boat Covers fit unmodified boats with no aftermarket accessories or boats with t-tops, ski/wakeboard towers or radar arches.

Due to the countless display configurations and monitor settings, actual fabric colors may appear slightly different than what you see here.

Taylor Made Covers are custom made at the Taylor Made factory for each boat size as well as customer's choice of material and color.

To help assure customer satisfaction, trained Taylor Made personnel are available for assistance with each order and may even contact customers prior to cover production to assure proper selection.

All Returns must be received within 30 days of receipt of the order.

All Products are non-returnable if they have been installed.

Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.

Please contact us for Manufacture Defects, Returns and help with Warranties.