Imtra Marine Lighting, 24 volt LED Rope Lighting, 3/8", PVC, Per Foot, Water & Weather Resistant
LED Rope Lighting is sold by the linear foot.The following required parts must be purchased separately to complete your rope light installation:
For 12 volt DC:ILMDL-CONKIT-6, Connector Kit for 3/8" Incandescent or DC-Powered LED Rope Light (Connector, & 6' Cord) ILMDL-END, End Cap
For 24 volt DC:ILMDL-CON24V-L6, Connector Kit for 3/8" 24 volt DC LED Rope Light when using Transformer (Connector, Rectifier & 6' Cord)ILMDL-END, End Cap
- Power Consumption (Watts): .87W
- Amp Draw: 0.04A/ft
- Voltage: 24 volt DC
- Bulb Spacing: 1"
- Bulb Orientation: Horizontal
- Pricing Units: Per Foot
- Recommended Air Temp Range: -4 Deg. to 122 Deg. F
- Cutability: Every 6"
- Maximum Run Length: 65'
The 120 volt rope light with 120 volt connection kit (ILMDL-CONKIT-6) may be plugged into any standard outlet without the need for an AC adapter or transformer. For hard-wiring, the plug may be removed (cut off) from the power cord. Please note that there is no ground wire. For 120 volt LED rope light, be sure to order the connection kit with built-in rectifier (ILMDL-CONKIT-L6).
The low voltage (12 or 24 volt DC) rope light may also be used for domestic use. However, it is not supplied with an AC adapter, and as it is normally hard-wired, it is not supplied with a plug. For household voltage (120 volt), you would need to add an appropriately sized step-down transformer (see our selection of transformers). For LED low voltage rope light (used with a transformer), be sure to order the appropriate connector kit (for 12 volt, use ILMDL-CON12 volt-L6; for 24V use ILMDL-CON24V-L6).