Propspeed Foul-Free Medium Kit

With an ultra-slick topcoat, Propspeed is specially formulated to prevent marine growth from bonding to metal surfaces below the waterline. It is proven to increase boat efficiency, reduce drag and save fuel and maintenance costs. It features an exceptionally strong chemical and mechanical bond between the metal substrate, the Etching Primer and the Clear Coat– ensuring that the Propspeed coating actually sticks to your running gear and performs season after season.

Propspeed also reduces the risk of corrosion by electrically isolating the metal, as well as limiting the exchanges between the ions and the gases contained in the water and the metal. In short, if a reaction can’t occur, there will be no corrosion!

The Propspeed system is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, pod drives, sail drives and other underwater metal.

Propspeed, the original and best performing foul-release coating in the industry, has been tried and tested around the world for over 21 years, consistently delivering customers the same result - improved boat performance, lower fuel and operational costs, sustained value of their investment, all while keeping the vessel’s running gear looking its best.

1 PROPCLEAN

The denatured alcohol in Propclean ensures that the metal surface is now completely free of contaminants and ready for Propprep. The Propclean solution comes pre-packaged with a wipe to make your job easier.

2 PROPPREP

Propprep is critical in the chemical preparation of the metal surface to be coated. The Propprep solution comes pre-packaged with a wipe to make your job easier.

3a&b ETCHING PRIMER BASE & HARDENER

This kit contains 240ml Etching Primer Base and 60ml Etching Primer Hardener. The Etching Primer is the origin of the radiant gold colour. Combined they are one of the best underwater Etching Primers on the market. Known best for its tenacious adhesion and corrosion resistance.

4 CLEAR COAT

This kit contains 200ml Clear Coat, a non-toxic, silicone topcoat which forms a super slick outer layer that marine growth cannot adhere to, improving speed and reducing fuel costs.

How To Apply

Foul-release coating for all underwater metals

More speed, less fuel™

Keep your running gear and any other underwater metals free of marine growth and protected against corrosion with Propspeed.

• All-in-one protection
• Defense against both marine growth and corrosion for all underwater metal assets.
• Superior adhesion to metal
• Strong long-lasting adhesion to metals is what makes Propspeed unparalleled to other products on the market.
• Multi-season
• Long-lasting solution that, when applied and maintained correctly, protects underwater metal assets for 1-2 years.
• Biocide free
• Foul-release, not antifoul. Foul-release coatings use physical means to reduce fouling, creating a surface that’s tough for marine organisms to adhere to.
• High performance system
• Specialized coating technology: the original and still the best foul-release system trusted globally for over 21 years.