Blackwood 27, T-Top Boat Cover (2000-2018)

Mfr: Taylor Made Products
$1,423.14 to $1,690.68
$1,423.14 to $1,690.68
Custom fit boat cover for a Center Console with a Standard Top. Designed for a Twin Engines (2). This boat has low bow rails, which are 8 inches or less. This custom cover was designed for a boat that has a thru-hull anchor.If you boat does not match this description, or you have any aftermarket parts that would change your boats profile, then this cover will not fit. Please contact us if you have any questions on the cover's fit. Image(s) is for reference, but may not be your exact boat.

Installation
  • One-person job to cover your t-top center console
  • Lightweight center console covers are uniquely designed with 1" wide webbing straps with plastic adjustable side release clips that allow for easy positioning and a secure fit on a wide range of t-top frames
  • This cover attach under your t-top to keep moisture from forming in your boat
  • Install or remove cover in under 5 minutes
  • T-Top sandbags are recommended for boats on lifts or in dry rack storage
  • A 5/16" diameter nylon rope is hemmed into the bottom of the cover to secure your cover to your boat around the hull and motor(s)
  • Tie down loops installed every 4' around the perimeter. This gives you the option to secure your cover to the trailer or if you're on a lift, you can hang Taylor Made's sandbags from them
  • Port or Starboard side zipper entry on located in-line with the helm seat


Elite Fabric
  • 9 oz per linear yard, 100% polyester
  • 5 year warranty
  • Extremely breathable
  • Holds up to UV rays for 10 years
  • Available in Black, Grey, Navy and Tan
Weathermax Fabric
  • 8 oz per linear yard, 100% polyester
  • 5 year warranty
  • Extremely breathable
  • Holds up to UV rays for 7 to 9 years
  • Available in Black and Navy
Ultima Fabric
  • 7 oz per linear yard, 100% polyester
  • 3 year warranty
  • Urethane coated on the inside
  • Holds up to UV rays 4 to 5 years
  • Available in Black and Navy

Taylor Made Boat Cover Return Policy and Warranty:

  • These boat covers are custom built to order and are non-returnable.
  • All custom covers are patterned for standard boats from the factory. These Custom Boat Covers fit unmodified boats with no aftermarket accessories unless noted in cover description.
  • Due to the countless display configurations and monitor settings, colors may appear slightly different than what you see here.

Ê

Ê

Item #
MPN
Fabric
Warranty
Blackwood 27, T-Top Boat Cover (2000-2018), Ultima
Item #:558296-Ultima
MPN:63756U
Fabric: Ultima
Warranty: 3 Year
Blackwood 27, T-Top Boat Cover (2000-2018), WeatherMax
Item #:558296-WeatherMax
MPN:63756W
Fabric: WeatherMax
Warranty: 5 Year
Blackwood 27, T-Top Boat Cover (2000-2018), Elite
Item #:558296-Elite
MPN:63756E
Fabric: Elite
Warranty: 5 Year

Ratings & Reviews

No reviews available

Be the first to Write a Review

Question: Does it cover the twin motors on transom? Will the cover fit over my trolling motor?
Eric O.

Answer: This Blackwood 27 T-top cover will be sewn to cover your engine or engines! When ordered you will be asked to provide the number of engines along with the make and model of those engines. The cover will them be built to fit your boat and the engines keeping them all safe.

The Blackwood 27 cover is designed to fit the boat with the trolling motor removed. This gives the cover the best fit for draining water and stopping dirt build up. As an added service, you can opt to have a trolling motor pocket sewn in. There is a $175.00 fee for that. The manufacturer, Taylor Made, would call you to get the dimensions and location of the motor before building the cover for you.

Taylor Made warns that adding the trolling motor pocket could give the cover a looser, semi-custom like, fit and might allow water to pool up in the bow area of the cover. Note that if you replace your trolling motor with a different model the pocket could end up being the wrong size or in the wrong place.
Rich S.

Warranty:

The length of the warranty may vary by product, please refer to your product for the exact terms and conditions of the warranty for your purchase.

Return:

  • Restocking charge will apply at a minimum of 20% for all product returned.
  • All cut or custom products are non-returnable.
  • All custom covers are patterned for standard boats from the factory.
  • These Custom Boat Covers fit unmodified boats with no aftermarket accessories or boats with t-tops, ski/wakeboard towers or radar arches
  • Due to the countless display configurations and monitor settings, actual fabric colors may appear slightly different than what you see here.
  • Taylor Made Covers are custom made at the Taylor Made factory for each boat size as well as customer's choice of material and color.
  • To help assure customer satisfaction, trained Taylor Made personnel are available for assistance with each order and may even contact customers prior to cover production to assure proper selection.
  • All Returns must be received within 30 days of receipt of the order.
  • All Products are non-returnable if they have been installed.
  • Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.
  • Please contact Go2marine LFS Marine and Outdoor for Manufacture Defects, Returns and help with Warranties.